Refuge 68″ x 30″ Rectangular GFRC Concrete Natural Gas Fire Pit - Flame Havens

The Flame Havens Refuge 68″ x 30″ Rectangular Natural Gas Fire Pit is the largest model in the Refuge Series and the one to specify when the fire needs to anchor a full outdoor room. Its 45″ burner opening throws a long, unbroken ribbon of flame, wide enough to warm seating on both long sides. The shell is cast from glass-fiber reinforced concrete (GFRC), which delivers the mass and edge definition of poured concrete at a fraction of the wall thickness, and holds up to rain, UV, and freeze-thaw cycles season after season.

A CSA-certified insert delivers up to 65,000 BTUs, lit by a battery-powered spark ignition with flame sensing, so no outlet or wiring is required. As a hardline natural gas fire pit on a low 15″ body, there is no tank to store or refill, which matters on a pit this size. Connect it once to a 1/2″ gas line and it is ready every evening. Ships in Graphite Black, Ivory White, or Natural Gray with a quick-disconnect gas hose, black reflective fire glass, a canvas cover, and a concrete surface care kit.

Sold separately: the 45″ x 11″ Rectangular Stainless Steel Burner Cover turns the pit into usable table space when the flame is off, and the 48″ x 14″ Rectangular Tempered Glass Wind Guard shields the flame on breezy evenings. Replacement covers, fire glass, lava rock, and gas conversion kits are also available.

• Install on a level, non-combustible surface.
• Requires a 1/2″ male NPT natural gas hardline run by a licensed installer.
• At 360 lb shipping weight, plan for curbside freight delivery and help on site to position the pit.
• A CSA-certified conversion kit is available if you later need to switch this unit to propane.
• Follow all instructions and safety information in the Owner's Manual.

• Owner's Manual, Natural Gas (PDF)
• Specification Sheet, 68″ x 30″ Natural Gas
• GFRC Concrete Surface Care Kit Instructions (PDF)