Refuge 56″ x 30″ Rectangular GFRC Concrete Natural Gas Fire Pit - Flame Havens

The Flame Havens Refuge 56″ x 30″ Rectangular Natural Gas Fire Pit puts a long, linear flame at the center of a seating group. Its 33″ burner opening runs nearly the full length of the pit, so the fire reads as a ribbon rather than a single point, the look most people are after when they search for a modern rectangular fire pit. The shell is cast from glass-fiber reinforced concrete (GFRC), which keeps the wall thin and the edges sharp while standing up to rain, sun, and freeze-thaw cycles.

A CSA-certified insert delivers up to 65,000 BTUs, lit by a battery-powered spark ignition with flame sensing, so no outlet or wiring is required. As a hardline natural gas fire pit on a low 15″ body, there is no tank to store or refill. Connect it once to a 1/2″ gas line and it is ready every evening. Ships in Graphite Black, Ivory White, or Natural Gray with a quick-disconnect gas hose, black reflective fire glass, a canvas cover, and a concrete surface care kit.

Sold separately: the 33″ x 11″ Rectangular Stainless Steel Burner Cover turns the pit into usable table space when the flame is off, and the 36″ x 14″ Rectangular Tempered Glass Wind Guard shields the flame on breezy evenings. Replacement covers, fire glass, lava rock, and gas conversion kits are also available.

• Install on a level, non-combustible surface.
• Requires a 1/2″ male NPT natural gas hardline run by a licensed installer.
• A CSA-certified conversion kit is available if you later need to switch this unit to propane.
• Follow all instructions and safety information in the Owner's Manual.

• Owner's Manual, Natural Gas (PDF)
• Specification Sheet, 56″ x 30″ Natural Gas
• GFRC Concrete Surface Care Kit Instructions (PDF)